I have a complete replacement option for you, but unfortunately the lens you are in need of has been discontinued by the manufacturer.
Instead you'll need to replace your light completely with the LED Trailer Tail Light Passenger Side # 328-003-85, and if you need the driver side as well you'd need # 328-003-85L. view full answer...
The correct wet bolt/ shackle upgrade kit for your MORryde CRE/3000 axle will depend on the length of your current shackle links, measured center hole to center hole. For 2-1/4 inch shackle links, use # MR46ZR or for 3-1/8 inch shackle links, use # MR76ZR.
If your suspension uses the Correct Track alignment/lift kit, use # MR58ZR for 2-1/4 inch links or # MR98ZR for 3-1/8 inch shackle links. view full answer...
The VD0434 part number you list is for a screen that is used in several Ventline Vents. If I follow your question correctly, you are looking for the Ventline part number, # BVD0434-31 for a birch white color or, # BVD0434-41 for a polar white. These are replacement screens and frames that work with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119.
Please note the product review and installation video linked below. view full answer...
In order to get the correct replacement springs (as you need to replace springs in pairs for any given axle) I'll need you to lift the trailer by the frame so the leaf spring is relaxed, and then measure from the center of one bolt hole to the center of the opposite bolt hole. Then we just need to match that with the weight rating of the axle to get you back up and running!
For example, the 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles # e27SR measures 26" long from center eye to... view full answer...
It is important to measure the dome light on your 2016 Jayco Eagle to ensure the Optronics 12V LED RV Dome Light # RVILL34 will cover the old light. This light is 10-5/16" long, 4-3/16" wide and 1-13/16" deep. It has several different mounting holes available if you want to ensure you have the same holes being used. I have included an image showing the dimensions of the light and the mounting hole separations for you to be able to use for comparing to the light on your Jayco. If you find... view full answer...
The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 45 Amp # PD4045KA is the replacement we have for your unit. It is larger because it also is the panel and is 12-1/4" long x 8-3/4" tall x 7-1/4" deep overall. The cutout dimensions are 10-3/4 inches long by 7-1/4 inches tall. I've attached a video to assist. view full answer...
The Valterra # T1001VP Waste Valve has a threaded on handle, but it will require a vise to hold the rod in place to get the handle to twist off.
You may also be interested in the Valterra # TC172 Waste Valve, which is cable operated valve. The 72" cable will give you lots of mounting location options. I have included a link to the valve below. view full answer...
I reached out to my contact at Dexter but unfortunately she wasn't able to track down any specific information on your axle using the numbers you provided. This appears to be an older model that pre-dates their current records.
Because of this the best way to find the correct bearing kit will be to simply pull one of the hubs and check for the numbers that should be stamped right inside the inner and outer bearings themselves. If you aren't able to read the numbers, then you can also... view full answer...
To replace the LED lights on your 19' awning I recommend going with the Vista Light LED Kit for Solera RV Awnings # LC25VR as it's 19' long as well and will do great for your application. These LEDs are white in color and are made in the USA!
If you just need the LED strip (and no track) then the Replacement LED Light Strip for Solera RV Awnings # LC423331 is what you need instead. view full answer...
Travel trailers frequently have two zones, one for speakers inside and second zone for speakers outside. These zones are independent, use one or both at the same time. Some larger RV's may have more than one inside zone. It appears to me that your travel trailer has two zones but I can not identify if have a single DIN or double DIN stereo; this is in reference to the size of the unit. Most multi-zone travel trailers have a double DIN and it's tough to go from a double to a single DIN... view full answer...
I went ahead and checked to see if we carry any replacement spring clips for your Ventline Ventadome trailer vent, and unfortunately that is not offered as a replacement.
Ventline has confirmed in the past that in order to get new spring clips you'd need a full replacement lid like the Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-601-00. view full answer...
Yes. The iRV RV Stereo # 292-101809 will play DVDs, CDs and has an AM/FM tuner feature; you will need to connect this to your TV, but it will allow you to play DVD movies with sound throughout your RV's speaker system.
I've also linked our review video of this stereo for you to have a look at. view full answer...
For your 2002 Jayco Heritage Pop-Up camping trailer, I recommend the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019. This latch fits doors that are 1-1/4 inches to 1-1/2 inches thick and installs into latch cutouts that are 2-1/2 inches wide x 3-1/2 inches tall to 3 inches wide x 4 inches tall. view full answer...
The Jensen RV Stereo part # JWM60A would be an excellent replacement option for the Jensen RV Stereo part AWM910. The cutout size needed as well as the mounting hole locations are virtually identical between the two units so this part of the process will be super easy to do. However, the wiring will be a bit difficult but I have attached the diagram of each below that you can use which should then make the swap pretty easy as all you will be doing is just connecting the wires together. view full answer...
From what I could find it looks like the GVWR of your 2012 Jayco Jay Flight 32BDHS is 10,200 lbs. This means that you likely have 12" brakes so the correct self-adjusting electric brake kit is part # AKEBRK-7-SA. You will want to verify this on your end though just to be sure. If you find a different diameter then it is likely the smaller 10" Nev-R-Adjust Kit # K23-478-479 instead. view full answer...
To replace the Northern Breeze V2425 vent on your 2006 Jayco I recommend the Ventline Ventadome # V2094SP-30 which is a standard manual 12V vent with a white lid - this should be pretty identical to what you currently have.
Be sure to pick up the Installation Kit # 344270KITW so you get all of the hardware and sealer needed to complete the installation. view full answer...
It sounds like you have a 2005 Jayco Jay Flight 31BHS which has a GVWR of 6,935 lbs. Assuming that is correct, it is likely you have 3,500 lb axles on your trailer. I recommend verifying this information by checking the axle tags to be sure.
If that is the case, you can use the Electric Trailer Brake Kit # AKEBRK-35-SA. These are 10" x 2-1/4" brake assemblies with a 4 bolt brake mounting flange pattern and a 3,500 lb axle rating. If you need mounting hardware we have the # BRKH10B.
Since... view full answer...
We sure do!
You will need Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 which is the correct replacement fan blade for the fan blade you have with VC 215 stamped in it.
I included a video of the # BVD0215-00 for you to take a look at. view full answer...
I do have a solution, but we do not have an axle that matches your 86" measurement. Since you only damaged the spindle it makes more sense to replace the spindle instead of the entire axle. You can take the # TRU77FR to an axle shop and have it welded on to repair what you currently have.
For a hub and drum you can use the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles # AKHD-655-35-EZ-K. This matches your current bolt pattern and drum size and is compatible with E-Z lube axles. view full answer...
For a replacement fan I recommend the Replacement Fan Blade for Ventline RV Range Hood - 6-7/8" Diameter # BCD0409-00. This has the additional fan blade you are looking for and works with PH series horizontal range hoods. Since I don't know for sure what you have, I recommend measuring to to verify this will work for you or looking for the specific model number. This fan blade has a 6-7/8" overall diameter and the shaft diameter is 0.214". view full answer...
Go To Results